Gather Supplies
Before you begin making your rainbow striped crayons, you will need to gather the necessary supplies. You will need crayons in the colors you want to use for the stripes, a sharp knife, and a silicone mold. You can purchase silicone molds specifically for making crayons online or at your local craft store. Additionally, you may want to cover your work surface with newspaper or wax paper to avoid any stains.
Peel and Chop the Crayons
Start by peeling off the paper wrapping from the crayons. Then use a sharp knife to chop the crayons into small pieces. The smaller the pieces, the easier it will be to melt and pour into the mold. Be sure to separate the colors you want to use for the stripes.
Melt the Crayon Pieces
Next, it’s time to melt the crayon pieces. You can either use a microwave or a double boiler. If using a microwave, place the chopped crayon pieces in a microwave-safe container and heat in 20-30 second intervals, stirring in between, until fully melted. If using a double boiler, place the crayon pieces in the top of the boiler and melt over medium heat, making sure to stir often so the crayons don’t burn.
Pour the Crayon Melt into the Mold
Once the crayons have melted, it’s time to pour them into the silicone mold. Start by filling the cavities with the color you want to use for the base of the crayon. Let it cool and harden slightly before adding the striped colors in alternating layers. Be sure to fill the mold all the way to the top with each color.
Cool and Remove the Crayons
Allow the crayons to cool completely and harden by placing the mold in the refrigerator or freezer for a few minutes. Once completely cool, gently pop the crayons out of the mold. If you have trouble getting them out, try bending the mold slightly or using a toothpick to loosen the edges. And voila, you now have your very own rainbow striped crayons!
