Understanding the Basics of Plunging a Bathtub Drain
If you are facing a clogged bathtub drain, then plunging is one of the easiest and quickest ways to clear it. Plunging works by creating a vacuum in the drain, which dislodges the blockage and allows the water to flow freely. In this article, we will guide you on how to use a plunger for a bathtub drain and get the job done in no time.
Gather Your Supplies
The first step is to gather the necessary supplies. You will need a plunger, which is easily available at any hardware store or online retailer. Make sure that you choose the right size of plunger for your bathtub drain, as using a plunger that is too small or too large may not work effectively. You should also wear rubber gloves to protect your hands from any debris or bacteria that may be present in the drain.
Plunging Technique
The next step is to use the plunger properly. Start by filling the bathtub with enough water to cover the plunger cup, but not so much that it spills over the edge of the tub. Then, hold the plunger vertically and center it over the drain. Ensure that you cover the drain opening completely with the plunger cup
Plunge Vigorously
Now, it’s time to start plunging vigorously. The aim is to create a vacuum in the drain, which means that you need to create a strong seal between the plunger and the drain opening. Push down on the plunger with strong force, and then pull it up quickly. Repeat this motion several times, making sure that the plunger remains in contact with the drain opening throughout.
Test the Drain
After a few minutes of plunging, stop and test the drain to see if it’s clear. Remove the plunger and run water down the drain to check if it’s flowing freely. If the water drains smoothly, then congratulations, you have successfully cleared the clog. If not, then you may need to repeat the plunging process or try a different method of unclogging the drain.
