Step-by-Step Guide to Replacing a Kitchen Tap
Replacing a kitchen tap may seem like a daunting task, but it’s actually quite simple with the right tools and instructions. Here’s a step-by-step guide to help you replace your old tap with a new one.
Gather Your Tools and Materials
Before you begin, you’ll need to gather the following tools and materials:
- Adjustable wrench
- Plumber’s tape
- New kitchen tap
- Bucket
- Towel
Turn Off The Water Supply
The first step to replacing your kitchen tap is to turn off the water supply. You’ll need to locate the shut-off valves under your sink and turn them clockwise to close them. If you can’t find these valves, turn off the main water supply to your house.
Remove the Old Kitchen Tap
Now that the water supply is off, you can remove the old kitchen tap. First, use the adjustable wrench to remove the nuts holding the old tap in place. Once the nuts are removed, you can lift the tap out of the sink. You may need to use a bit of force to remove any adhesive or grime that’s holding it in place.
Install the New Kitchen Tap
Once you’ve removed the old tap, you can install the new one. First, place the gasket and mounting plate over the holes in the sink. Then, insert the shanks of the new tap through the mounting holes. Secure the tap in place by tightening the nuts underneath the sink with your adjustable wrench. Finally, use plumber’s tape to wrap the threads on the supply lines.
Test the New Kitchen Tap
Now that your new tap is installed, turn on the water supply and test it out. Check for any leaks and make sure that the water flow is normal. If everything looks good, you’re all set! Enjoy your new kitchen tap.
