Measure Your Shower Area
Before you start shopping for a shower curtain, you need to measure the area where it will be installed. This will ensure that you choose a curtain that fits perfectly and provides adequate coverage to keep the water inside the shower. To measure your shower area, you will need a measuring tape or a ruler.
Start by measuring the width of your shower area. Measure from one wall to the opposite wall and write down the measurement. Next, measure the height of your shower area. Measure from the top of the shower rod down to the bottom of the shower floor. Write down this measurement as well.
Consider the Length of the Shower Curtain
When choosing a shower curtain, you need to consider the length of the curtain. The curtain should be long enough to cover the entire length of the shower area and reach the floor. This will prevent water from splashing out and keep your bathroom floor dry.
If you have a standard-sized shower, a curtain with a length of 72 inches should be sufficient. However, if you have a taller shower or if you prefer a longer curtain, you can opt for a curtain with a length of 84 inches or 96 inches. Measure the height of your shower area and choose a curtain length that matches or exceeds this measurement.
Account for Mounting Height
In addition to the size of the shower area, you also need to consider the mounting height of the shower curtain rod. The curtain should hang at a height that provides privacy while allowing easy access to the shower. The standard mounting height for a shower curtain rod is approximately 72 inches from the floor. However, you can adjust this height based on your preference.
If you prefer a higher mounting height, measure the distance between the floor and the desired height for the curtain rod. Subtract this measurement from the height of your shower area to determine the length of the curtain that will hang below the rod. Make sure to choose a curtain that is long enough to reach this length.
Choose the Right Width
In addition to the length, you also need to choose the right width for your shower curtain. The curtain should be wide enough to provide adequate coverage and prevent water from splashing out of the shower area. To determine the right width, measure the width of your shower area and add a few inches on each side for extra coverage.
A standard shower curtain width is around 70 inches. However, if you have a wider shower area or prefer a fuller look, you can opt for a wider curtain or use multiple curtains to cover the entire width. Make sure to choose a curtain that is wide enough to provide adequate coverage.
Account for Curtain Hooks
Finally, when measuring for a shower curtain, you also need to consider the curtain hooks. The hooks will add additional length and width to the overall size of the curtain. Make sure to account for the length and width added by the hooks when determining the measurements for your curtain.
Once you have measured your shower area and considered the length, width, and mounting height, you are ready to start shopping for a shower curtain. Remember to choose a curtain that matches your measurements and complements your bathroom decor. With the right measurements, you can ensure a perfect fit and a stylish look for your shower area.
