How to fix loose clothes peg springs?

How to fix loose clothes peg springs featured

The annoyance of loose clothes peg springs

Loose clothes peg springs are a common frustration, causing annoyance and inconvenience when they fail to hold clothes on a line. Fixing them is a simple task that can save money and prevent the need to purchase new pegs. In this article, we will explore some of the best methods for fixing loose clothes peg springs.

Method 1: Replacing the spring

The most straightforward method for fixing loose clothes peg springs is to replace the spring. This can be done by purchasing a new spring from a hardware store or online retailer. To replace the spring, simply remove the old spring from the peg and replace it with the new one. This method is quick and effective, but it does require the purchase of new springs.

Method 2: Tightening the spring

If you don’t want to spend money on new springs, it is possible to tighten the existing springs. To do this, simply use pliers to squeeze the top and bottom of the spring together. This should make the spring tighter, which will improve the grip of the clothes peg. However, be careful not to squeeze the spring too much, or it may become damaged.

Method 3: Using a rubber band

If you don’t have pliers or access to new springs, another option is to use a rubber band. Simply wrap the rubber band tightly around the spring of the clothes peg. This will make the spring tighter and improve the grip of the peg. However, keep in mind that the rubber band may degrade over time and need to be replaced.

Method 4: Adding a toothpick

If you have a wooden clothes peg with a loose spring, you may be able to improve the grip by adding a toothpick. This is done by inserting a toothpick between the two halves of the peg, next to the spring. The toothpick should be oriented vertically, with one end against the top of the peg and the other against the bottom. This will make the peg tighter and improve the grip on clothes.

Method 5: Using a binder clip

If you don’t have any clothes pegs on hand, but you do have a binder clip, you can use it as a substitute. Simply open the binder clip and use it to attach the clothes to the line. This is a quick and easy solution that does not require any spring tightening or replacement. However, keep in mind that binder clips may not be as durable as clothes pegs and may degrade over time.

Jump to section