How can I fix a running toilet?

How can I fix a running toilet featured

5 Steps to Fixing a Running Toilet

A running toilet can be a frustrating and wasteful problem to deal with. Not only does it disrupt your peace and quiet, but it can also drive up your water bill. Fortunately, fixing a running toilet is often a simple DIY task that you can handle on your own. Here are five steps to help you fix a running toilet.

Step 1: Identify the Problem

The first step in fixing a running toilet is to identify the source of the problem. There are several common causes for a running toilet, such as a faulty flapper valve, a stuck float, or a leaking fill valve. Take off the toilet tank lid and inspect the components inside to see if anything is visibly broken or not functioning properly.

Step 2: Adjust the Water Level

If the water in your toilet tank is constantly running, it could be due to an incorrect water level. To adjust the water level, locate the fill valve, which is usually located on the left-hand side of the toilet tank. Turn the adjustment screw or knob on the fill valve to raise or lower the water level. Make small adjustments and test the toilet after each adjustment to ensure it’s working correctly.

Step 3: Replace the Flapper Valve

If the water in your toilet tank is constantly leaking into the toilet bowl, the flapper valve may be the culprit. The flapper valve is a rubber component that seals the opening between the toilet tank and the bowl. Over time, the flapper valve can deteriorate or become misaligned, causing water to continuously leak. To replace the flapper valve, shut off the water supply to the toilet, drain the tank, and remove the old flapper valve. Install a new flapper valve according to the manufacturer’s instructions.

Step 4: Clean or Replace the Fill Valve

If adjusting the water level doesn’t solve the problem, the fill valve may need to be cleaned or replaced. The fill valve is responsible for filling the toilet tank with water after each flush. Over time, minerals and debris can accumulate in the fill valve, causing it to malfunction. To clean the fill valve, shut off the water supply, remove the valve cap, and flush out any debris. If cleaning doesn’t work, you may need to replace the fill valve entirely.

Step 5: Check for Other Issues

If the above steps didn’t resolve the issue, there may be other underlying problems causing your toilet to run. Check the flapper chain length to ensure it’s properly connected and not too loose or too tight. Inspect the overflow tube to make sure it’s not blocked or damaged. If you’re still unable to fix the running toilet, it’s recommended to call a professional plumber for assistance.

Jump to section